Owner’s ManualRead all precautions and instruc-tions in this manual before usingthis equipment..215-0000704/05 Rev BK P S -LL P 2
Assembly10Figure 4Step 4Attach Seat Pad (24) to Main Frame (1) using two Bolts (38) and two Washers (43).Assemble Back Pad (23) to Back Pad Support (9
Assembly11Step 5Start by attaching Cable (15) to Main Frame (1). See detail A below.Insert cable into Pulley A location and then attach Pulley A to M
Weight Ratios12KPS-LP2 Ratio %Weight(lbs)205%10 20.515 30.7520 4125 51.2530 61.535 71.7545 92.2555 112.7565 133.2575 153.7585 174.2595 194.75105 215.2
Exploded View13
REF# KEYS PART# DESCRIPTION QTY.1 223-00249 Main Frame 12 219-00280 Right Handle 13 219-00285 Left Handle 14 223-00250 Front Rocker 15 223-00251 Back
Warranty Information15KEYS FITNESS PRODUCTS, L.P.POWER SYSTEM SERIES LIFETIME WARRANTYThis Warranty applies in the United States and Canada to product
Customer Service1.888.340.0482Keys Fitness4009 Distribution DriveSuite 250Garland, TX 75041www.keysfitness.com
Table of Contents2Important Safety Information 3Before You Start 4Assembly 5-11Weight Ratios 12Exploded View 13Parts List 14Warranty Information 15
Important Safety Information3THANK YOU for making this Power System unit a part of your exercise pro-gram. Keys Fitness and our Power System Series a
Before You Start4Prior to assembly, remove components from the box and verify that all the listed parts were supplied.Important: The LP2 Leg Press mus
Assembly5
Assembly6
Step 1Slide one Pillow Block Bearing (17) onto each side of the Back Rocker (5). Use two Bolts (33), four Washers(44), and two Nylon Locknuts (41) to
Assembly8Step 2Attach Foot Plate (7) to the Connect Frame (6) using three Bolts (32), three Washers (44), and three NylonLock-nuts (41).Attach Right H
Assembly9Step 3Attach Cross Base (8) to Main Frame (1) using Plate (14), two Bolts (39), four Washers (43), and two NylonLock-nuts (42).Slide Pulley B
Comments to this Manuals